Shimano SM-JC40 Spezifikationen PDF herunterladen (Seite 11)

Inner link

Outer link

Connecting pin

<RD-6770: Rear Derailleur>

• Always be sure to adjust the top adjustment bolt and the low adjustment bolt according to the instructions given in the

adjustment section. If these bolts are not adjusted, the chain may become clamped between the spokes and the large sprocket

and the wheel may lock, or the chain may slip onto the small sprocket.

• If the amount of looseness in the links is so great that adjustment is not possible, you should replace the derailleur.

• Periodically clean the derailleur and lubricate all moving parts and pulleys.

• If gear shifting adjustments cannot be carried out, check the degree of parallel of the rear dropouts.

• If there is a large amount of play in the pulleys which causes worrying noise while riding, replace the pulleys.

• The tension pulley has an arrow on it to indicate the direction of rotation. Install the tension pulley so that the arrow is pointing

clockwise when looking at the pulley from the outside.

• As illustrated in Fig. A, we strongly recommend to set the connecting pin in the hole of the outer link on the front side in the

direction of travel. The chain’s level of strength is enhanced compared to the method in Fig. B.

<CN-6701: 10-speed Chain for Road Riding>

Chain’s

direction of

travel

• Place the chain into the chain cutting tool as shown in the illustration. If the chain is set incorrectly into the chain cutting tool,

it will break the positioning plate.

eng_1-24,48_ULT-DM-ENG-TRANSLATION.indd 11 11-10-2011 12:50:59

eng_1-48_ULT-DM-ENG-TRANSLATION.indd.pdf 11 7/11/11 10:49:02

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Keine Kommentare

Shimano SM-JC40 Spezifikationen Seite 11